Late 19's. In the 19th century, masks were used in the field of medical care. The German pathologist Ledge suggested that medical personnel should use mule masks to prevent bacterial infections. 1897 Meiqi introduced a method of wrapping mouth and nose with gauze to prevent bacteria from entering. Later it was improved and fastened to the ear with a belt. This is the mask we know today. The main function of the FFP2 mask is to effectively prevent the spread of respiratory diseases.
How do I use the FFP2 mask properly?
How is the production process of the FFP2 mask?
How do I maintain the FFP2 mask?
How do I use the FFP2 mask properly?
1. Remember: the FFP2 mask covers mouth, nose and chin, and the nose chip should be compacted. In the event of contamination, deformation, damage and odour, the mask shall be replaced in good time; The cumulative duration of each mask shall not exceed eight hours; It is not recommended to reuse masks used in supra-regional public transport or hospitals.
Note: Masks do not wear up and down or inside and outside and do not release mouth and nose when wearing the FFP2 mask.
2. Wash your hands as often as possible under running water, use soap or hand disinfectants and clean your fingertips, palms and wrists carefully. Wash your hands with disposable paper towels or clean towels.
Wash your hands immediately after touching breathalytes (e.g. after sneezing), before and after passing documents, before and after the toilet, before, during and after food preparation, and after coming out and coming back.
How is the production process of the FFP2 mask?
The FFP2 mask attaches the non-woven raw materials to the material frame of the masking film machine. After debugging is in order, the machine automatically creates the mask sheet. Then the mask sheet is transferred to the earband machine for tapping, and the product is the finished product. Pack it up again. This is a semi-automatic machine production process. 3-6 persons are required for the operation. (1 main appliance + 2 earbands)
Fully automatic machines are relatively labor-saving and labor-saving. The raw materials are hung on the rack. The machine of the FFP2 mask automatically adds materials. It only needs two or three employees operating.
How is the FFP2 mask machine maintained?
A. The maintenance of the FFP2 mask machine focuses on inspection and adjustment.
B. Recognize, adjust and eliminate the hidden problems of the FFP2 mask machine and equalize the wear level of each component. It is necessary to stop carrying out diagnostic tests and state inspections on the parts that impair the performance of the device and the parts with signs of errors and then to make the necessary changes, adjustments and corrections.
C. Based on routine maintenance, the main work contents are smoothing, tightening and checking all relevant parts of the FFP2 mask machine and cleaning them.
With the development of science and technology, the FFP2 mask is increasingly used in many places, and everyone needs the FFP2 mask. SXiamen PinzTec Co., Ltd is committed to providing every customer from all countries with the perfect service and the best FFP2 mask.